Looking to clean and restore your slate flooring to a like-new shine? The CleanPro® Residential Floor Stripping and Refinishing Process will clean and shine your tile floors like never before. We offer the best New England slate floor cleaning for both residential and commercial.
We specialize in New England slate floor cleaning in entryways, kitchens, living rooms, dining rooms, hallways and wherever you slate floors need to be cleaned or restored.
Our residential slate floor cleaning services all of New England with a focus on Connecticut, Pennsylvania, Massachusetts, New York and New Jersey.
Before
After
Attention will be given to all areas that need to be taped off and protected. All spots, stains, and marks will be hand scrubbed and scraped to remove all blemishes possible. All grout lines will be pre-soaked with stripping solutions for maximum stripping.
All Slate flooring will be machine stripped clean, using a 160 lb. Mercury 175 r.p.m. floor scrubber, equipped with a .46 grit silicon tynex brush. This stiff nylon brush, with different length bristles, will completely strip the Slate floor removing wax, dirt, and grime. All edges, corners and grout lines will be hand stripped clean. This stripping method will not harm the Slate flooring. All of the cleaning chemicals are biodegradable and environmentally safe.
Any Slate flooring with Urethane coating will need to be stripped using Zip-Strip.
After the Slate floors are stripped clean all of the solutions will be removed. The floors are then given a complete mopping and thorough rinse with a low ph neutralizing solution for maximum sealer adhesion.
After the Slate floors have completely dried they are vacuumed with an Electrolux Olympia Vacuum cleaner with a 3 layer dust filter. This will insure a perfectly clean floor for the application of the Slate floor sealer and Slate floor finishes. At this point any finish or urethane left from the Slate stripping will be hand sanded with 60 grit paper.
Now that all the Slate floors are clean and dust free the first coat of Spartan Terra Glaze will be applied. This coat will take approximately 20-30 minutes to dry. The second coat will then be applied to all the slate flooring. As the porosity of Slate varies, additional coats may be needed, or the Slate floor may need to be buffed at 2000 r.p.m. to achieve maximum shine.
Terra Glaze is an acrylic polymer seal developed exclusively for use on stone flooring. A 25% solids metal interlock formulation, Terra Glaze conditions, seals, and protects the natural beauty of stone. Once applied, Terra Glaze becomes a hard, tough seal that combats stone’s inherent susceptibility to damage and deterioration due to abrasion, scratching, scuffing, and wear.
Give us a call….TODAY!
we will strip and seal your slate floors.
Contact us with any questions or problems concerning your Connecticut floor cleaning, commercial and residential floor stripping, floor refinishing, and contract floor maintenance needs.